Hydraulic Non-Slam Check Valve

Hydraulic Non-Slam Check Valve

Hydraulic Non-Slam Check Valve

Basic Information of Hydraulic Non-Slam Check Valve

This valve prevents backflow of media and reduces water hammer to achieve the safe and quiet effect.
Hydraulic Non-Slam Check Valve

Features of Hydraulic Non-Slam Check Valve

1. Small fluid resistance, large flow;

2. Automatic control using medium energy;

3. Prevent water hammer phenomenon;

4. Slowly-closing silencing.

Hydraulic Non-Slam Check Valve

Principle of Hydraulic Non-Slam Check Valve

When the pipe supplies water from the inlet end of the valve, the water from the needle valve and one-way valve enters the valve cover control room and then is discharged downstream through the ball valve. Due to the small opening of the needle valve, the discharge speed of the control room is greater than that of the inlet to replenish water, thus reducing the pressure in the control room. The inlet pressure acting under the main valve disc all the time lifts the main valve disc, thereby opening the main valve disc and supplying water downstream. When the pipeline stops supplying water, the downstream water begins to flow back. Due to the effect of the one-way valve, the backflow water cannot flow out after entering the valve cover control room through the ball valve. As a result, the pressure of the valve cover control room increases gradually and the main valve disc is closed tightly.
Hydraulic Non-Slam Check Valve

Installation and Commissioning of Hydraulic Non-Slam Check Valve

Needle valve and ball valve adjust together to get the best opening or closing speed. For specific use, please consult ZECO Valve Group.

Part

Material

Standard

Body

Ductile Iron

EN 1563/DIN 1693

Bonnet

Ductile Iron

EN 1563/DIN 1693

Trim

Stainless Steel 431

EN10088-1/ASTM A959

Seat

Stainless Steel 431

EN10088-1/ASTM A959

Diaphragm

EPDM / NBR

ISO 4633

Pilot Valve

Stainless Steel 431

EN10088-1/ASTM A959

For the materials options not listed, consult factory.

ZECO manufactures valves in more than 50 different alloys.

Product scope , Standards & Materials of Hydraulic Non-Slam Check Valve

Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2

Leave us Message

Related Product Cases
XI‘an Subway

XI‘an Subway

Xi 'an metro is the urban rail transit system of Xi 'an, Shaanxi province, China.The first line opened for trial operati...
Baoli Daming Lake South Station

Baoli Daming Lake South Station

In the early stage of ZECO, the analysis, design and final debugging analysis of hydraulic balance system were carried o...
Jinan University

Jinan University

Jinan University is a comprehensive university jointly established by shandong provincial people's government and minist...
Related News
ZECO Valve Product Information Catalog Download