New Type Wafer Concentric Butterfly Valve

New Type Wafer Concentric Butterfly Valve

New Type Wafer Concentric Butterfly Valve

Basic information of New Type Wafer Concentric Butterfly Valve

New Type Wafer Concentric Butterfly Valve can be used as adjusting and intercepting equipment in a variety of corrosive operating conditions.
New Type Wafer Concentric Butterfly Valve

Features of New Type Wafer Concentric Butterfly Valve

1. Body jaw adapts to 10bar and 16bar bolt fixation;
2. Special flange for butterfly valve is not required during installation;
3. Disc for spraying nylon, corrosion resistant;
4. No pin structure, no corrosion point.
New Type Wafer Concentric Butterfly Valve

Principle of New Type Wafer Concentric Butterfly Valve

Because large diameter may have too much torque, the large diameter is recommended to use the turbine for easier manual operation.
New Type Wafer Concentric Butterfly Valve

Installation and Commissioning of New Type Wafer Concentric Butterfly Valve

Clean the sealing cover of butterfly valve and dirt in the pipeline, the flange mouth on the pipeline must be right, pressure the rubber sealing ring of concentric butterfly valve, there is no need to use the sealing washer, it is forbidden to install the concentric butterfly valve and weld the flange, otherwise it will burn the rubber sealing ring of butterfly valve. For specific use, please consult ZECO Valve Group.

Part

Material

Standard

Body

Ductile Iron

EN 1563/DIN 1693

Disc

Ductile Iron+Nylon

EN 1563/ISO 4633

Stem

Stainless Steel 431

EN10088-1/ASTM A959

Handle

Ductile Iron

EN 1563/DIN 1693

Seat

EPDM

ISO 4633

Bushing

CuZn39Pb1 / C37000

EN12167/ASTM B135

For the materials options not listed, consult factory.

ZECO manufactures valves in more than 50 different alloys.

Product scope, Standards & Materials of New Type Wafer Concentric Butterfly Valve

Size Range: 2"~48"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: EN 558-2008
Flange End Dimension: EN1092-2, ISO 7005-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: EN 1074-1 and 2, EN 12266

Leave us Message

Related Product Cases
Wenzhou Olympic Sports Center

Wenzhou Olympic Sports Center

Wenzhou Olympic Sports Center main stadium project and Wenzhou sports school Yongzhong campus project are located in the...
XI‘an Subway

XI‘an Subway

Xi 'an metro is the urban rail transit system of Xi 'an, Shaanxi province, China.The first line opened for trial operati...
Tianjin East Jianneng Thermal Commissioning

Tianjin East Jianneng Thermal Commissioning

ZECO demonstrated the test of the flow balancing valve to Tianjin East Jianeng Thermal Power Company on the spot. After ...
Related News
ZECO Valve Product Information Catalog Download