Single Body Combination Air Valve

Single Body Combination Air Valve

Single Body Combination Air Valve

Basic information of Single Body Combination Air Valve

This valve is used is installed at the outlet of the pump or in the water supply pipeline to eliminate air accumulated in the pipe, so as to improve the service efficiency of the pipe and the pump. When negative pressure is generated in the pipe, the valve will immediately suck in external air to prevent damage to the pipe due to negative pressure.
Single Body Combination Air Valve

Features of Single Body Combination Air Valve

1. Suction at negative pressure;
2. Fast exhaust;
3. Exhaust only does not drain;
4. Slight exhaust and large.

Single Body Combination Air Valve

Principle of Single Body Combination Air Valve

When tube began to water injection, the disc in the open position, a large number of exhaust, when the air line up, the full of water in the valve, floating ball up and drive the valve closed, stop the exhaust, when water tube is normal transportation, if there is a small amount of air within the valve to a degree, water levels fall in the valve, floating ball drops, the air is being exhausted from the holes. When the pump stops, the water flow in the pipe is empty or negative pressure is generated in the pipe. At this time, the plug is opened quickly and the air is inhaled to ensure the safety of the pipe. 
Single Body Combination Air Valve

Installation and Commissioning of Single Body Combination Air Valve

This valve is usually installed at the highest point of the system, such as tightening the bonnet on the valve body, the air valve stops the exhaust, normally, the bonnet should be open. Air valve can also be used with the block valve, convenient exhaust valve maintenance. For specific use, please consult ZECO Valve Group.

Part

Material

Standard

Body

Ductile Iron

EN 1563/DIN 1693

Bonnet

Ductile Iron

EN 1563/DIN 1693

Exhaust Hood

Ductile Iron

EN 1563/DIN 1693

Float Ball

Stainless Steel 431

EN10088-1/ASTM A959

Strainer

Stainless Steel 431

EN10088-1/ASTM A959

Seal

EPDM / NBR

ISO 4633

For the materials options not listed, consult factory.

ZECO manufactures valves in more than 50 different alloys.

Product scope, Standards & Materials of Single Body Combination Air Valve

Size Range: 2"~8"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2

Leave us Message

Related Product Cases
Fuzhou Water Company

Fuzhou Water Company

Fuzhou Water Company has six water plants in operation, with a total capacity of 1.32 million cubic meters of water per ...
Guangzhou Railway Station

Guangzhou Railway Station

Guangzhou MetroIt is the third largest in China. It is also one of 14 members of the international union of subways. ZEC...
Binhai Water Company

Binhai Water Company

ZECO provides a large number of large-caliber flanged double fffset butterfly valves, large-caliber resilient gate valve...
Related News
ZECO Valve Product Information Catalog Download